Maytag Washer F0 E2 Error Code

What F0 E2 means

F0 E2 is the oversuds code. The washer has detected too many suds, and your load may not be fully rinsed or the water may not be fully removed.

Front load washers

The washer runs an automatic suds reduction routine to remove most of the excess suds, so let it keep running. Use only High Efficiency (HE) detergent. Non-HE detergent, or more than the recommended amount, can cause excess suds. They can also lower the spin speed, leaving very wet loads, and add rinses that lengthen the cycle.

• “Sud” or “Sd” with the Rinse status light on: the washer is removing suds, so let the cycle continue.
• “Sud” or “Sd” with the Cycle Complete light on: too many suds were detected, so the load may not be thoroughly rinsed. You may want to select a Rinse/Spin cycle.
• Bulk dispenser: if it is enabled, do not add extra detergent to the load.

Top load washers

The advice is the same on detergent: use only HE detergent and the manufacturer’s recommended amount. For “no splash” or “easy-pour” liquid chlorine bleach, which contains a thickening agent that may create excess suds, run the washer empty with regular liquid bleach, or clean it with a washer cleaning product before the next load. A Rinse/Spin cycle can finish the rinsing.

Related codes

• F0 E3: overload.
• F0 E5: an off-balance load that also affects spinning.

Maytag washer service in Los Angeles

If F0 E2 keeps coming back with HE detergent and a normal amount, call (310) 882-7671 for Maytag washer service in Los Angeles, with the model number and the detergent you used.

Source: F0 E2 – Front Load Washer – Product Help – Maytag Product Help; F0E2 – Error Code – Product Help – Maytag Product Help