Code overview
- Error code
- F3 E3
- Appliance
- Washer
F3 E3 on a Maytag washer points to the inlet water temperature circuit on front load models. The help pages give a 5-minute power reset first.
What this code means
F3 E3
On front load models F3 E3 is an inlet water temperature fault, with the inlet thermistor open or shorted.
F3 E3 appears on the display of a Maytag washer when the control reports a fault. The meaning depends on the washer type, so check which one you own before reading further.
What F3 E3 means
On front load washers, F3 E3 is an inlet water temperature fault: the inlet thermistor reads open or shorted. On top load washers, Maytag’s help page lists F3 E3 but gives no cause, only a reset and then service.
What to try first
The manufacturer’s help pages for both washer types give the same first step. Resetting the control can sometimes clear the problem, much like restarting a computer.
- Disconnect the washer from power for 5 minutes. If it is plugged into an outlet, unplug it.
- Plug it back in and watch whether F3 E3 returns.
If the code comes back after the reset, the help pages direct you to contact service.
Related codes
- F3 E2 is a pressure system fault, a neighbouring F3 code.
- F3 E1 means the washer cannot detect the water level.
- F3 E5 is a mini bulk system error, also in the F3 group.
Maytag washer repair in Los Angeles
If F3 E3 returns after the power reset, call (310) 882-7671 for Maytag washer service in Los Angeles. Have the code, the washer’s model number and whether it is front or top load ready, along with the fact that you already tried the 5-minute reset. See also the washer repair page.
Source: F3 E3 – Front Load Washer – Product Help; F3E3 – Error Code – Product Help
Safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.