Maytag Range F2
F2 on a Maytag range is a control message about oven sensing or communication. Do not open the back panel. Note whether the cooktop still heats, then cool the oven down.
Code overview
- Error code
- F2
- Appliance
- Range
F2 on a Maytag range. Oven-side context only — leave gas and high-voltage parts closed, and record the model number.
F2 on this page is a Maytag range oven display, not a cooktop parts list. Copy the code and frame/drawer model number, then let the cavity cool before you look at the door.
What this code means
F2
On many Maytag freestanding and slide-in ranges, F2 is used when the control is unhappy with oven temperature sensing or a related signal. It is not a cooktop diagnostic by itself, and it is not a single-part verdict. Ranges share code letters across years, so your model’s documentation is the authority.
Symptoms you may notice
-
F2 on the oven display
-
Bake or broil heat that seems too high, too low, or interrupted
-
Some cooking modes locked out until the message clears
Possible causes
-
An oven temperature sensor the control no longer trusts
-
A wiring or board communication fault
-
A one-time glitch after a power flicker — only useful if F2 does not return
Safe checks you can make
-
Copy F2 and the full model number from the frame or storage-drawer label
-
Let the oven cool completely before you look at the door seal or anything stuck in the door
-
Note whether surface burners or elements still operate
-
Do not reset power as a repair — one power cycle is enough to see if the message was momentary
Safety warning
A range combines heat, line voltage, and often gas. If you smell gas, leave the area, avoid switches and flames, and follow local emergency guidance. Otherwise stop using the oven until F2 is interpreted on your model.
What not to attempt
- Do not open sealed gas parts
- Do not access high-voltage wiring behind the range
- Do not bypass oven safety interlocks
When to call a technician
If F2 stays after the oven is cool, or bake heat is unreliable, book diagnosis. Say whether the cooktop still works and whether the code appeared during preheat, bake, or after a self-clean.
Frequently asked questions
Often the surface still heats, but do not rely on the oven until the code is confirmed on your model.
It may hide the message briefly. If the sensor or control is at fault, F2 returns.
The exact code, model number, cooktop yes/no, and which oven mode was running.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.