Code overview
- Error code
- F2
- Appliance
- Wall Oven
F2 on a Maytag wall oven may point to a problem with the oven temperature sensor. Maytag's response is a one-minute power reset at the breaker, then a check that the code stays away.
What this code means
F2
There may be a problem with the temperature sensor in the oven, the control board, or their wiring.
About this error
Maytag wall ovens report F2 when the oven spots a fault. F2 on a Maytag wall oven means there may be a problem with the temperature sensor in the oven, the control board, or their wiring.
Before you call anyone
- Switch the breaker(s) off, then give it one minute with no power.
- Switch the breaker(s) on to bring the oven back up.
- Monitor the oven for one minute to make sure the error code does not display again.
- Confirm the oven operates normally.
If the message persists, stop there and call for service rather than taking the oven apart.
Neighbouring codes
- F2 E3 is easy to mix up with this one; it relates to the keypad and control.
- See F1 E9 for the message tied to the control board and wiring.
Maytag oven repair in Los Angeles
For Maytag wall oven service in Los Angeles, reach us at (310) 882-7671. Keep the displayed code, your oven’s model number and a note of the reset you did close by.
Source: Maytag Product Help: range and wall oven error code list; Maytag Product Help: F2 wall oven
Safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.