Maytag Dishwasher F8 E4
F8 E4 is a two-part code Maytag dishwashers show on the control. Record the exact characters, your model number, and whether you see water before you do anything else.
Code overview
- Error code
- F8 E4
- Appliance
- Dishwasher
F8 E4 on a Maytag dishwasher. Confirm the display, check for water around the unit, and stop the cycle if it leaks.
This guide is only for F8 E4 on a Maytag dishwasher. Photograph the display, copy the door-frame model number, and note any water you can see without moving the cabinet.
What this code means
F8 E4
On many Maytag dishwashers, F8 E4 is used when the control has reacted to water in a place it does not expect — often the base. That is a starting point, not a universal definition. The same F/E pair can map differently by series and year, so treat the code as a label to take to diagnosis, not as a parts list.
Symptoms you may notice
-
The cycle stops and F8 E4 stays on the display
-
You notice dampness, drips, or a puddle near the dishwasher
-
The dishwasher will not resume a normal wash after you try to restart
Possible causes
-
Water collecting under the tub (a leak-protection response on many models)
-
A drain path that left standing water from an earlier cycle
-
A float, sensor, or connection that the control is reading as wet — only a technician can confirm which
Safe checks you can make
-
Write down F8 E4 exactly as shown, plus the full model number from the door-frame label
-
Look for water on the floor, kickplate, or under the unit without tipping the dishwasher
-
Confirm the dishwasher sits level and the door latches fully
-
If you can see the drain hose, check for an obvious kink — do not pull the unit out to chase it
Safety warning
Stop using the dishwasher if you see water near electrical parts or if F8 E4 returns. Water and live components are a reason to unplug only if the outlet is dry and easy to reach.
What not to attempt
- Do not tip the dishwasher to empty the base
- Do not remove internal panels or electrical parts
- Do not bypass a leak sensor or float
When to call a technician
If F8 E4 comes back after you have noted the code, model number, and any water, book a diagnosis. Bring when the code first appeared and whether the tub had standing water.
Frequently asked questions
On many Maytag dishwashers it is used around leak detection, but it is not a universal meaning. Confirm it against your model’s documentation.
No. If water is present, pause use so the leak does not spread.
The exact code, full model number, photos of the display and any water, and whether the last cycle finished.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.