Code overview
- Error code
- F2 E5
- Appliance
- Wall Oven
F2 E5 on a Maytag wall oven may point to a problem with the keypad and control. Maytag's response is a one-minute power reset at the breaker, then a check that the code stays away.
What this code means
F2 E5
There may be a problem with the oven's keypad, its control, or the associated wiring.
What the display is telling you
Owners of Maytag wall ovens may see F2 E5 on the display. F2 E5 is a fault message on Maytag wall ovens, and the cause it names is the oven’s keypad, its control, or the associated wiring.
Other codes in this family
Next door in the list: F2 E6 (about the keypad and control). See F2 E4 for the message tied to the keypad and control. See F3 E1 for the message tied to the lower oven sensor.
Reset the oven power
- Cut power to the oven at the circuit breaker(s) for a single minute.
- Put the breaker(s) back in the on position.
- For one minute, check whether the fault message returns.
- Confirm the oven operates normally.
If F2 E5 comes back, or the oven still does not operate properly, it is time to arrange service.
Wall oven repair in Los Angeles
If the reset did not clear the message, Maytag wall oven service is available in Los Angeles at (310) 882-7671. Tell us the code, the model number and what you tried.
Safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.