Code overview
- Error code
- 9D41
- Appliance
- Wall Oven
Maytag wall oven code 9D41 points to the door latch assembly, door switch or wiring. A one-minute power reset is the first step.
What this code means
9D41
The code points to a possible problem with the oven door latch assembly, the door switch, or the associated wiring.
Seeing the code 9D41 on a Maytag wall oven tells you there could be a fault in the door latch assembly of the oven, the switch for the door, or else the associated wiring.
A short checklist
- Power down by switching off the breaker for one minute.
- Switch the breaker back on.
- Observe the oven for a minute to confirm that the code comes back.
- Make sure of that the oven works normally.
Should the code comes back, arrange a service visit. Door latch and switch work is best left to a technician, so do not open the oven up yourself.
Related codes
- 9D12: same door latch assembly area
- 9D52: also concerns the oven door latch
- 9D42: shares the door latch and switch wording
- 9D32: also about the door latch and switch
Los Angeles service for a Maytag wall oven
Still stuck on 9D41 with a Maytag wall oven in Los Angeles? Phone (310) 882-7671 or look at oven repair. Keep the code, the model number and what you already tried handy when you call.
Source: 9d41 – Wall Oven – Product Help – Maytag Product Help
Safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.