Code overview
- Error code
- 3D11
- Appliance
- Wall Oven
Maytag wall oven code 3D11: what the display means and the power reset steps to try.
What this code means
3D11
The oven temperature sensor, the control, or the associated wiring may have a problem.
A 3D11 message on a Maytag wall oven display means a possible problem with the oven temperature sensor, the control, or the associated wiring.
Try this reset
- Turn off the circuit breaker(s) feeding the oven and leave them off for one minute.
- Turn the breaker(s) back on.
- Watch the oven for one minute to confirm 3D11 does not return.
- Check that the oven operates normally.
A code that persists after the reset calls for service. Gas or electrical work inside the oven belongs to a technician.
See also
- 3D12: also points at the temperature sensor, the control or the wiring.
- 3D21: a neighbouring code with the same sensor, control and wiring wording.
- 3D22: shares the same reset instructions and the same temperature sensor wording.
Wall oven repair in Los Angeles
We service Maytag wall ovens in Los Angeles. Call (310) 882-7671 or see our oven repair page, and have the code 3D11, the model number and your reset attempt ready.
Source: 3D11 Wall Oven – Product Help
Safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.